The following instructions are pretty straight forward. However if in doubt ... Click here to contact us about our in house tuning service.

Go to the Services menu by pressing the Services button on the Sky/Sky+ remote (the procedure works on both Sky and Sky+ boxes). The following screen will appear.

Scroll down to SYSTEM SETUP with the arrow keys, or simply press the number 4, and then press select. The following screen appears.

Scroll down to ADD CHANNELS with the arrow keys, or simply press the number 4, and then press select. The following screen appears.

INSTRUCTIONS

• Enter the frequency (using the numbered buttons) - eg. 10773 (the full stop is inserted automatically).
• Move the highlight bar down to Polarisation, then use the left/right buttons to change polarity if necessary.
• Move the highlight bar down to Symbol Rate, then use the left/right buttons to change symbol rate if necessary.
• Move the highlight bar down to FEC, then use the left/right buttons to change FEC if necessary.
• Move the Highlight Bar down to Find Channels and press select.

• The Sky/Sky+ box will now search for new channels, and a list of will be displayed.
• Use the yellow button to choose required channels, press the yellow button again to deselect channels.
  NB. channels are stored in the order they are selected. See below.

• Press select when all required channels have been ticked.
• Press select again to return to the Add Channels screen.
• Repeat the above procedure with other required frequencies/channels.

To watch the extra channels press the Sevices button and scroll down to OTHER CHANNELS with the arrow keys, and then press select.

Sky+ users please note that Live Pause/Recording does not work on these channels.

Click here for frequencies for extra channels.